Siemens 6SL3040-0NA00-0AA0 преобразователь частоты

Siemens 6SL3040-0NA00-0AA0
SIEMENS · SIRIUS 6SL3040

***SPARE PART*** SIMOTION DRIVE-BASED CONTROLLER EXTENSION CX32; INVERTER CONTROL MODULE; TO INCREASE DRIVE COUNT ON SIMOTION D4X5; INTERFACES: 4 DI, 4 DI/DO, 4 DRIVE-CLIQ

Технические характеристики 6SL3040-0NA00-0AA0

Технические данные Siemens 6SL3040-0NA00-0AA0
ПараметрЗначение
Siemens 6SL3040-0NA00-0AA0***SPARE PART*** SIMOTION DRIVE-BASED CONTROLLER EXTENSION CX32; INVERTER CONTROL MODULE; TO INCREASE DRIVE COUNT ON SIMOTION D4X5; INTERFACES: 4 DI, 4 DI/DO, 4 DRIVE-CLIQ
Сведения об изделии
product brand nameSIMOTION
product type designationCX32
Version of the motion control systemController Extension
Integrated drive control / header
Maximum number of axes for integrated drive control
servo6
vector4
V/f8
noteAlternative control modes; drive control based on SINAMICS S120 CU320, firmware version V2.x
Communication
Interfaces
DRIVE-CLiQ4
General technical data
FanNo fan
DC supply voltage
rated value24 V
minimum20.4 V
maximum28.8 V
consumed current / typical800 mA
notewith no load on inputs/outputs, no 24 V supply via DRIVE-CLiQ interface
Making current, typ.1.6 A
Power loss, typ.20 W
Ambient temperature, during
storage-40 ... +70 °C
transport-40 ... +70 °C
operation0 ... 55 °C
noteMaximum 5000 m (16405 ft) above sea level. Above an altitude of 2000 m (6562 ft), the max. ambient temperature decreases by 7 °C (12.6 °F) every 1000 m (3281 ft).
Relative humidity
during operation5 ... 95 %
without condensation, tested acc. to IEC 60068-2-38Wert fehlt
Air pressure700 ... 1 060 hPa
Degree of protectionIP20 / UL open type
height380 mm
width25 mm
depth270 mm
Depth / NoteWhen the spacer is removed 230 mm (9.05 in) deep
net weight2 200 g
Digital inputs / header
number of digital inputs4
DC input voltage
rated value24 V
for signal "1"15 ... 30 V
for signal "0"-3 ... +5 V
Electrical isolationYes
noteYes, in groups of 4
Current consumption for "1" signal level, typ.10 mA
Input delay time for
signal "0" → "1", typ.50 µs
signal "1" → "0", typ.150 µs
Digital inputs/outputs / header
Number of digital I/Os4
Parameterization possibility of the digital I/Osparameterizable as DI, as DO, as probe input (max. 3)
If used as an input / header
DC input voltage
rated value24 V
for signal "1"15 ... 30 V
for signal "0"-3 ... +5 V
Electrical isolationNo
Current consumption for "1" signal level, typ.10 mA
Input delay time for DI 9 to DI 11 for
signal "0" → "1", typ.5 µs
signal "1" → "0", typ.50 µs
notecan also be used as probe inputs
Input delay time for DI 8 for
signal "0" → "1", typ.50 µs
signal "1" → "0", typ.100 µs
Measuring input / reproducibility5 µs
If used as an output / header
Load voltage
rated value24 V
minimum20.4 V
maximum28.8 V
Electrical isolationNo
Current carrying capacity for each output, max.500 mA
Leakage current, max.2 mA
Output delay for
signal "0" → "1", typ.150 µs
signal "0" → "1", max.400 µs
signal "1" → "0", typ.75 µs
signal "1" → "0", max.100 µs
noteData for Vcc = 24 V; load 48 Ohm; "1" = 90 % VOut, "0" = 10 % VOut
Switching frequency of the outputs for
resistive load, max.100 Hz
inductive load, max.2 Hz
lamp load, max.11 Hz
Short-circuit protectionYes
Additional technical data
Back-up of non-volatile data
of retentive dataunlimited buffer duration
Approvals
USAcULus
CanadacULus
AustraliaRCM (formerly C-Tick)

Техническая документация по 6SL3040-0NA00-0AA0

← Все исполнения 6SL3040

Ваша корзина

Оформить заказ

Заказ сохранится в магазине. Войдите в личный кабинет, чтобы видеть историю заказов.